Home
1616 S Spencer Ave.
Indianapolis IN 46203
(317) 955-8444

Home

Molds

Books

ICS History



Shopping Cart

Good News!


Listen to counsel and receive instruction, That you may be wise in your latter days. Proverbs 19:20

Air Capitol Molds
Mold Search

We offer over 4,100 different molds from 23 companies to search on

Enter a sequence of letters that make up ONE word or part of a word
that might be found in the mold description
or the Mold Number alone without any letters at all.

Example: ornament (not tree ornament) or 37 (not B37 or 37A)

Note: If you get too many results, most of which are not
the word you put in, try typing a space before or after the word.

  

You May Search the following Companies by checking their boxes
or Go directly to a company's mold listing by clicking its underlined link.

Byron CASCO Ceramichrome Christy
CJ Heinz Hershey Icco
JD Jones Mayco Nancy
NBE Nowell Provincial RiverView
Ross Scioto Shadetree Shiloh
Studio Waers Yozie

    


If you have a question concerning the molds we offer,
such as shipping costs, delivery time, pictures, sizes, etc.
please read the NOTICE below.
If that section does not answer your question, call or email us.


Air Capitol Molds
We have 0 different Air Capitol molds available
Molds are listed in alpha-numeric order.

If you have a question concerning the molds we offer, such as shipping costs,
delivery time, pictures, sizes, etc. please read the NOTICE below.

Enter Starting
Mold Number
  
Mold Number Manufacturer Description Image
(Click to Enlarge)
Weight Discount
Applied
Mold Price Order
Enter Starting
Mold Number
 


NOTICE
Read the Following
It should answer most of your questions

Please do not call or email me with these same questions.
I've spent a lot of time compiling this section. Please use it.

TABLE OF CONTENTS

Mold Manufacturer Contact Information
What We Sell
Why Order From Us?
The Ordering Process
Ordering Parts of Molds
Prices and Discounts
Shipping Charges
Shipping Cost Estimate
Sales Taxes
Where We Will Ship To
How Long Will It Take To Get My Order?
Mold Picture Absent?
The Dimensions of the Mold are Missing
Can't Find a Specific Mold I'm Looking For
Ceramic Shows

What We Sell
All pictures show examples of finished pieces. What we offer are Brand New Molds that form the pieces.
These molds are made of plaster, to be used only with ceramic casting slip (mud) and perhaps wax.
NOT TO BE USED FOR CASTING PLASTER.

We do not offer Greenware, Bisque or Finished Pieces - Only the Molds that make them.
Molds do not include straps or rubber bands to hold them together while pouring slip into them.
You will have to purchase them from another ceramic supply.

Why Order From Us?

The advantages of ordering from us are several:

We are the only company in the world that has available molds from 61 different companies.
You can search through all of them with one word, such as "horse".
The vast majority of the molds have pictures and desctiptions.
If we don't have a picture, then neither does the manufacturer.

Order any of them with the press of one button. No need to contact us by phone or email.

When you order directly by phone from the manufacturer or another company,
you risk a misunderstanding by the person taking your order and you could
end up getting the wrong mold or having your order go to the wrong address.
Due to this miscommunication its going to cost someone more money and delay.

As opposed to ordering from your local ceramic shop, you don't have to wait up to 30 days
before your order actually goes to the mold manufacturer. We place your order with them promptly.

You will get a 20% - 25% discount purchasing from us depending on the mold manufacturer.
Many manufacturers make you order a certain amount to get a discount. We don't. In most cases,
our discounts are equal to or greater than the manufacturers offer.

Instead of following the status of your order from each manufacturer,
we notify you by email when each manufacturer ships.

You pay the actual shipping & handling costs for the manufacturer to ship directly to you.
We initiallly charge your card an estimated shipping costs to make sure you have enough
resources to pay for your order and its shipping. We then readjust that charge when the manufacturer
bills us for the cost of your order and its shipping & handling when your order is actually shipped.

The entire reason for this site is because you may not have a local ceramic supply to order your molds.
You can easily order molds and have them shipped directly from the mold manufacturer to you.
You still get a discount regardless of the size of the order and you pay actual shipping & handling costs.


The Ordering Process
WE ACCEPT ORDERS ONLY ONLINE. Public organizations may optionally email or fax Purchase Orders instead..
We will NEVER take Telephone Orders.
The reason for this is because mistakes are often made over the phone
and we don't want either of us to lose money because of mistakes.

Just press the button to the right side of the mold you want.
This will take you to your shopping cart where you can adjust the quantity of items or
enter 0 to remove it from the cart. You can then press the button
to have the computer recalculate your total.

You can then continue shopping by pressing the button.

When you are finished, press the button and enter your
name, address, etc., along with your form of payment.

The computer does not charge your card. Nor does it show the estimated shipping charges (see below).
When we receive your order, we add on the estimated shipping amount and then
we, personally, charge your card and email you your pending receipt.

When your order is completely shipped from all of the manufacturers, we adjust
what you paid by refunding or charging more so that you are paying the
actual shipping & handling charges. We cannot be any fairer than that.
If you need a tracking number, ask the mold manufacturer AFTER you receive notice of the shipment.

Ordering Parts of Molds
If you want to order a mold that makes up a part of a complete piece
where a completed piece requires 2 or more molds to make it, if the individual mold parts
are not listed as available for sale, you must order them directly from the
Mold Manufacturer.

Prices
Prices Quoted in Red are the Discounted Prices available to all, regardless of
your being a business, organization, or individual.
The percentage of your discount is shown in the column"Discount Applied".

Sales Taxes
Sales taxes are charged only to Indiana Residents. If you live in Indiana
and have a business license, put that number in the Additional Instructions box in your shopping cart
and you will not be charged sales tax.
Non-Profit Organizations and Governmental Agencies are not charged sales taxes.

Where We Will Ship To
WE SHIP ONLY TO ADDRESSES IN THE UNITED STATES.
If you do not live in the U.S., you may have the manufacturer ship to a re-shipping company
or to a friend who will forward it on to you.
Notice: The company or person the manufacturer ships to must open the box and inspect it
for damages. The manufacturer is responsible for damages only to the oroginal U.S. destination.
Have the re-shipper insure it from their location to your final destination.
We recommend that you contact the
Mold Manufacturer and see if they will ship to you
directly by UPS or FedEx, DHL or U.S. Mail. You would
then be purchasing directly from the manufacturer and not us.

Delivery Time

WE SHIP NOTHING EXCEPT LITERATURE.

ALL MOLDS AND KILNS ARE MADE TO ORDER AND
ARE NOT WAITING ON THE SHELVES READY TO SHIP.

THE MANUFACTURERS DO ALL OF THE SHIPPING OF MOLDS AND KILNS.
BECAUSE OF THIS, DON'T ASK US ABOUT THE STATUS OF YOUR ORDER
UNTIL 6 WEEKS HAVE PASSED AND YOU HAVE NOT YET RECEIVED YOUR ORDER.
WE WILL NOT CHECK WITH THE MANUFACTURER UNTIL AFTER 5 WEEKS HAVE PASSED.


ALSO, IF YOU NEED A TRACKING NUMBER, ASK THEM FOR ONE, NOT US.

ALLOW 3 - 6 WEEKS FOR DELIVERY, DEPENDING ON THE MANUFACTURER.
MOLDS ARE DELIVERED DIRECTLY FROM THE MANUFACTURER TO YOUR DOOR.

NO MOLDS MAY BE PICKED UP AT OUR SHOP. WE DON'T STOCK ANY MOLDS.

PLEASE DO NOT ASK TO EXPEDITE YOUR ORDER. IT WON'T DO ANY GOOD.
THE MANUFACTURERS MAKE THE MOLDS ON A FIRST-COME, FIRST-SERVED BASIS ONLY.
REMEMBER: THESE MOLDS ARE MADE TO ORDER
AND ARE NOT WAITING ON THE SHELVES READY TO SHIP.

Based on years of experience, the average time it takes for the mold manufacturers to ship is:

HK Enterprises 3-4 weeks (HK is temp closed due to illness)
NBE Molds 1-2 weeks
Riverview Molds 3-4 weeks
Shiloh Molds 1-3 weeks

Shipping Charges
(see also
Shipping Cost Estimate)

PRICES SHOWN DO NOT INCLUDE SHIPPING CHARGES.
THESE CHARGES ARE ADDED AFTER YOU PLACE YOUR ORDER.

SHIPPING CHARGES WILL NOT BE SHOWN ON YOUR COMPUTER-GENERATED RECEIPT.

APPROXIMATE SHIPPING CHARGES WILL BE CALCULATED AND YOUR CARD CHARGED
WHEN YOUR ORDER IS PREPARED TO BE SENT TO THE MANUFACTURER(S).

WHEN YOUR ORDER IS COMPLETE AND WE KNOW HOW MUCH
THE MANUFACTURER(S) CHARGED FOR SHIPPING, WE WILL
EITHER REFUND YOUR CARD IF YOU PAID TOO MUCH
OR CHARGE YOUR CARD MORE IF YOU PAID TOO LITTLE
SO THAT YOU ARE PAYING THE ACTUAL SHIPPING AND HANDLING CHARGES
AND NOT JUST A MADE-UP FIGURE.


WE WILL NOTIFY YOU BY EMAIL WHEN YOUR ORDER HAS BEEN SHIPPED
FROM EACH MANUFACTURER. WHEN YOUR ENTIRE ORDER HAS BEEN SHIPPED
A FINAL RECEIPT, INCLUDING THE ACTUAL SHIPPING CHARGES WILL BE INCLUDED
AS AN ATTACHMENT TO THAT EMAIL

NOTE: EACH MANUFACTURER SHIPS ONLY THE MOLDS IT MAKES.
THE COST PER MOLD FOR SHIPPING GOES DOWN IF YOU ORDER MORE MOLDS FROM
THAT PARTICULAR MANUFACTURER. UPS AND FEDEX CHARGE SO MUCH FOR A BOX.
THE MORE THAT CAN BE PLACED IN THE BOX, THE LESS THE SHIPPING PER MOLD WILL BE.

TO DECREASE SHIPPING CHARGES, ORDER MULTIPLE MOLDS
MADE FROM THE SAME MANUFACTURER.
JUST BECAUSE YOUR ORDER CONTAINS THE SAME MOLD COMPANY,
SOME OF THAT COMPANY'S MOLDS MAY BE MADE BY DIFFERENT MANUFACTURERS.
THAT IS BECAUSE WHEN OLD COMPANIES SOLD THEIR MASTERS, THEY MAY HAVE BEEN
SOLD TO A FEW DIFFERENT BUYERS.
FOR EXAMPLE, CERTAIN BYRON MOLDS ARE NOW MADE BY 3 DIFFERENT MANUFACTURERS.
CHECK THE MOLD MANUFACTURER COLUMN FOR EACH
MOLD YOU WISH TO ORDER ON THE PAGE.

YOU CAN SEE HOW WE COMPUTE THE APPROXIMATE SHIPPING COSTS
AT THE BOTTOM OF THIS PAGE.


Mold Listings Lacking Pictures
If a picture is not included with the description of a mold, then we don't have a picture of the finished piece.
The reason the picture is not there, it is because the mold manufacturer probably doesn't have one.

Note that we will not email pictures to individuals nor try to find a mold that matches a picture you email us.

Mold Listings Lacking Sizes
The sizes of the finished pieces are sometimes listed in the descriptions.
But the description and size is dependent on the information the mold manufacturers gave us.
If the size is not given and you need to know, don't ask us, but rather,
contact the manufacturer.

What if a Mold is Not Listed?
If you are looking for a mold attachment that is not listed separately for sale,
you will have to order that part directly from the
mold manufacturer.

If you tried using the Mold Search and did not find what you are looking for,
make sure you entered only ONE word that would be in the description.
If you were looking for a mold number, make sure you enter ONLY the number
without any prefixes or suffixes or name of the mold company.
Do not enter S-1300 or DM2300A. Enter only 1300 or 2300.
In other words, make sure you have followed the directions.

If you are looking for a certain catalog or book not listed on our
Books/Catalogs page, we don't have it. No need to call or email us asking
where you might get one, we don't know.

If you are looking for a mold made by a certain company that is not named in the list under Mold Search,
we do not sell it and don't know where you can get it. Please don't ask us.

If you are looking for a specific mold from a company we do represent, if it is not listed when you
click on the link under Mold Search, consider that all of the molds we sell are listed
by mold company in alpha-numeric order. If you are looking for a mold number
and it is skipped on our web site, that mold is not available from the manufacturer
and we do not know where you might find it. Don't ask us where to get it. We won't know.
If you think we are holding back some molds and not listing them, ask yourself a question,
"Why would we hold anything back?" That would be stupid.

Ceramic Shows
WE DO NOT ATTEND THE CERAMIC SHOWS.
With the massive loss of manufacturers attending ceramic shows, you have to know
which of our mold manufacturers go to the shows.

The following manufacturers never attend ceramic shows:
NBE Molds and Riverview Molds which also makes Ross Molds.
Shiloh Molds and HK Enterprises usually attend the shows.

To eliminate shipping charges and get an extra 5% discount,
select your molds from our site and in the Additional Information section
on the check-out page, indicate what show you want to pick up at and
finish checking out. We will charge your card when we receive your order
and notify the manufacturer. As long as that manufacturer is going to your show,
you will receive the 5% extra discount and you will not pay shipping charges.
However, if you fail to pick up your molds at that show, you will forfeit the extra
discount and the manufacturer will ship the molds to you and charge you for shipping.


MOLD SHIPPING COST ESTIMATE

The following chart shows how we compute your approximate shipping costs.

Consider that most mold companies are out of business and they have been bought out by several manufacturers.
The only mold company that we carry that still makes new molds is Mayco Molds. Clay Magic still makes
new molds but you have to go to their website to see them.

Add up the total cost of the molds you selected
for EACH SPECIFIC MANUFACTURER (not mold company) separately.
The mold manufacturer is in a separate column next to the mold company in the mold listing.
Then use the table below to get the approximate shipping cost from that particular manufacturer.
Add up the Estimated Shipping from each manufacturer of the molds selected to get the total
Estimated Shipping Cost that we will charge your card when we process your order.

If you have a mold that costs $20 made by Shiloh Molds and another mold that
costs $15 from NBE Molds, the approximate cost we calculate for shipping
would be $18 + $12 = $30 because each manufacturer is shipping their own molds to you.
If your order is going to Alaska or Hawaii, double that amount.

Regardles of how much you initially pay for the Estimated Shipping & Handling,
the final amount you pay will be the Actual & Handling costs.
When all of the molds have been shipped, your total will be adjusted
either up or down or not at all from that Estimated Cost we originally charge your card.

For shipments to the Eastern or Western Seaboard, you can expect the Actual
Shipping Cost to be 10% more because of the way UPS charges for where it goes.

Note that the ESTIMATED shipping costs are based on molds that are not too big and
do not weight a lot. For a set of large molds weighing 30 lbs or more, expect the estimated and actual
shipping costs to be more because these molds have to be shipped one by one
in their own boxes due to size and weight constraints. A large order of such molds will have
to be shipped by motor freight which has a high cost but will be less than if shipped any other way.

Order Size from
Specific
Manufacturer
Estimated Shipping Depending on Manufacturer
 HK Enterprises NBE Molds Riverview MoldsShiloh Molds
$1 - $26 $22 $14 $36 $22
$27 - $40 90% 90% 120% 90%
$41 - $60 80% 80% 100% 80%
$61 - $149 70% 70% 90% 70%
$150 - $299 60% 60% 80% 60%
$300 & Up 50% 50% 70% 50%

Top of List

For more information on how we make ceramic items, see Overview of Ceramic Methods from Start to Finish

© 2010-2023 Indiana Ceramic Supply, Inc.

This page last updated 10/11/2023