1616 S Spencer Ave. Indianapolis IN 46203 (317) 955-8444 Make no friendship with an angry man, And with a furious man do not go, Lest you learn his ways And set a snare for your soul. Proverbs 22:24-25

Mayco Molds

     

Mayco Molds We have 11 different Mayco molds available Molds are listed in alpha-numeric order. If you have a question concerning the molds we offer, such as shipping costs, delivery time, pictures, sizes, etc. please read the NOTICE below.
Enter Starting Mold Number
Mold Number	Manufacturer	Description	Image (Click to Enlarge)	Weight	Discount Applied	Mold Price	Order
M1463	NBE Molds	Couch Box 8.5 x 5.0 x 5.0 To estimate shipping, Click Here		unk	20%	$48.00  38.40
M1464	NBE Molds	Chest of Drawers Box 6.00 x 8.25 x 5.00 To estimate shipping, Click Here		unk	20%	$28.00  22.40
M1465	NBE Molds	Ottoman Box 3.75 x 2.25 To estimate shipping, Click Here		unk	20%	$21.00  16.80
M1467	NBE Molds	Napkin Holder / Salt and Pepper Sofa 9.0 x 9.5 x 5.5 To estimate shipping, Click Here		unk	20%	$60.00  48.00
M1468	NBE Molds	Hats, Books and Pillows for M1462-M1467 This mold is used by M1462 Chair Box / Card Holder 6.75 x 4.50 x 5.00 M1463 Couch Box 8.5 x 5.0 x 5.0 M1464 Chest of Drawers Box 6.00 x 8.25 x 5.00 M1465 Ottoman Box 3.75 x 2.25 M1467 Napkin Holder / Salt and Pepper Sofa 9.0 x 9.5 x 5.5 To estimate shipping, Click Here		unk	20%	$17.50  14.00
Enter Starting Mold Number   NOTICE Read the Following It should answer most of your questions Please do not call or email me with these same questions. I've spent a lot of time compiling this section. Please use it. TABLE OF CONTENTS Mold Manufacturer Contact Information What We Sell Why Order From Us? The Ordering Process Ordering Parts of Molds Prices and Discounts Shipping Charges Shipping Cost Estimate Sales Taxes Where We Will Ship To How Long Will It Take To Get My Order? Mold Picture Absent? The Dimensions of the Mold are Missing Can't Find a Specific Mold I'm Looking For Ceramic Shows What We Sell All pictures show examples of finished pieces. What we offer are Brand New Molds that form the pieces. These molds are made of plaster, to be used only with ceramic casting slip (mud) and perhaps wax. NOT TO BE USED FOR CASTING PLASTER. We do not offer Greenware, Bisque or Finished Pieces - Only the Molds that make them. Molds do not include straps or rubber bands to hold them together while pouring slip into them. You will have to purchase them from another ceramic supply. Why Order From Us? The advantages of ordering from us are several: We are the only company in the world that has available molds from 61 different companies. You can search through all of them with one word, such as "horse". The vast majority of the molds have pictures and desctiptions. If we don't have a picture, then neither does the manufacturer. Order any of them with the press of one button. No need to contact us by phone or email. When you order directly by phone from the manufacturer or another company, you risk a misunderstanding by the person taking your order and you could end up getting the wrong mold or having your order go to the wrong address. Due to this miscommunication its going to cost someone more money and delay. As opposed to ordering from your local ceramic shop, you don't have to wait up to 30 days before your order actually goes to the mold manufacturer. We place your order with them promptly. You will get a 20% - 25% discount purchasing from us depending on the mold manufacturer. Many manufacturers make you order a certain amount to get a discount. We don't. In most cases, our discounts are equal to or greater than the manufacturers offer. Instead of following the status of your order from each manufacturer, we notify you by email when each manufacturer ships. You pay the actual shipping & handling costs for the manufacturer to ship directly to you. We initiallly charge your card an estimated shipping costs to make sure you have enough resources to pay for your order and its shipping. We then readjust that charge when the manufacturer bills us for the cost of your order and its shipping & handling when your order is actually shipped. The entire reason for this site is because you may not have a local ceramic supply to order your molds. You can easily order molds and have them shipped directly from the mold manufacturer to you. You still get a discount regardless of the size of the order and you pay actual shipping & handling costs. The Ordering Process WE ACCEPT ORDERS ONLY ONLINE. Public organizations may optionally email or fax Purchase Orders instead.. We will NEVER take Telephone Orders. The reason for this is because mistakes are often made over the phone and we don't want either of us to lose money because of mistakes. Just press the button to the right side of the mold you want. This will take you to your shopping cart where you can adjust the quantity of items or enter 0 to remove it from the cart. You can then press the button to have the computer recalculate your total. You can then continue shopping by pressing the button. When you are finished, press the button and enter your name, address, etc., along with your form of payment. The computer does not charge your card. Nor does it show the estimated shipping charges (see below). When we receive your order, we add on the estimated shipping amount and then we, personally, charge your card and email you your pending receipt. When your order is completely shipped from all of the manufacturers, we adjust what you paid by refunding or charging more so that you are paying the actual shipping & handling charges. We cannot be any fairer than that. If you need a tracking number, ask the mold manufacturer AFTER you receive notice of the shipment. Ordering Parts of Molds If you want to order a mold that makes up a part of a complete piece where a completed piece requires 2 or more molds to make it, if the individual mold parts are not listed as available for sale, you must order them directly from the Mold Manufacturer. Prices Prices Quoted in Red are the Discounted Prices available to all, regardless of your being a business, organization, or individual. The percentage of your discount is shown in the column"Discount Applied". Sales Taxes Sales taxes are charged only to Indiana Residents. If you live in Indiana and have a business license, put that number in the Additional Instructions box in your shopping cart and you will not be charged sales tax. Non-Profit Organizations and Governmental Agencies are not charged sales taxes. Where We Will Ship To WE SHIP ONLY TO ADDRESSES IN THE UNITED STATES. If you do not live in the U.S., you may have the manufacturer ship to a re-shipping company or to a friend who will forward it on to you. Notice: The company or person the manufacturer ships to must open the box and inspect it for damages. The manufacturer is responsible for damages only to the oroginal U.S. destination. Have the re-shipper insure it from their location to your final destination. We recommend that you contact the Mold Manufacturer and see if they will ship to you directly by UPS or FedEx, DHL or U.S. Mail. You would then be purchasing directly from the manufacturer and not us. Delivery Time WE SHIP NOTHING EXCEPT LITERATURE. ALL MOLDS AND KILNS ARE MADE TO ORDER AND ARE NOT WAITING ON THE SHELVES READY TO SHIP. THE MANUFACTURERS DO ALL OF THE SHIPPING OF MOLDS AND KILNS. BECAUSE OF THIS, DON'T ASK US ABOUT THE STATUS OF YOUR ORDER UNTIL 6 WEEKS HAVE PASSED AND YOU HAVE NOT YET RECEIVED YOUR ORDER. WE WILL NOT CHECK WITH THE MANUFACTURER UNTIL AFTER 5 WEEKS HAVE PASSED. ALSO, IF YOU NEED A TRACKING NUMBER, ASK THEM FOR ONE, NOT US. ALLOW 3 - 6 WEEKS FOR DELIVERY, DEPENDING ON THE MANUFACTURER. MOLDS ARE DELIVERED DIRECTLY FROM THE MANUFACTURER TO YOUR DOOR. NO MOLDS MAY BE PICKED UP AT OUR SHOP. WE DON'T STOCK ANY MOLDS. PLEASE DO NOT ASK TO EXPEDITE YOUR ORDER. IT WON'T DO ANY GOOD. THE MANUFACTURERS MAKE THE MOLDS ON A FIRST-COME, FIRST-SERVED BASIS ONLY. REMEMBER: THESE MOLDS ARE MADE TO ORDER AND ARE NOT WAITING ON THE SHELVES READY TO SHIP. Based on years of experience, the average time it takes for the mold manufacturers to ship is: HK Enterprises 3-4 weeks (HK is temp closed due to illness) NBE Molds 1-2 weeks Riverview Molds 3-4 weeks Shiloh Molds 1-3 weeks Shipping Charges (see also Shipping Cost Estimate) PRICES SHOWN DO NOT INCLUDE SHIPPING CHARGES. THESE CHARGES ARE ADDED AFTER YOU PLACE YOUR ORDER. SHIPPING CHARGES WILL NOT BE SHOWN ON YOUR COMPUTER-GENERATED RECEIPT. APPROXIMATE SHIPPING CHARGES WILL BE CALCULATED AND YOUR CARD CHARGED WHEN YOUR ORDER IS PREPARED TO BE SENT TO THE MANUFACTURER(S). WHEN YOUR ORDER IS COMPLETE AND WE KNOW HOW MUCH THE MANUFACTURER(S) CHARGED FOR SHIPPING, WE WILL EITHER REFUND YOUR CARD IF YOU PAID TOO MUCH OR CHARGE YOUR CARD MORE IF YOU PAID TOO LITTLE SO THAT YOU ARE PAYING THE ACTUAL SHIPPING AND HANDLING CHARGES AND NOT JUST A MADE-UP FIGURE. WE WILL NOTIFY YOU BY EMAIL WHEN YOUR ORDER HAS BEEN SHIPPED FROM EACH MANUFACTURER. WHEN YOUR ENTIRE ORDER HAS BEEN SHIPPED A FINAL RECEIPT, INCLUDING THE ACTUAL SHIPPING CHARGES WILL BE INCLUDED AS AN ATTACHMENT TO THAT EMAIL NOTE: EACH MANUFACTURER SHIPS ONLY THE MOLDS IT MAKES. THE COST PER MOLD FOR SHIPPING GOES DOWN IF YOU ORDER MORE MOLDS FROM THAT PARTICULAR MANUFACTURER. UPS AND FEDEX CHARGE SO MUCH FOR A BOX. THE MORE THAT CAN BE PLACED IN THE BOX, THE LESS THE SHIPPING PER MOLD WILL BE. TO DECREASE SHIPPING CHARGES, ORDER MULTIPLE MOLDS MADE FROM THE SAME MANUFACTURER. JUST BECAUSE YOUR ORDER CONTAINS THE SAME MOLD COMPANY, SOME OF THAT COMPANY'S MOLDS MAY BE MADE BY DIFFERENT MANUFACTURERS. THAT IS BECAUSE WHEN OLD COMPANIES SOLD THEIR MASTERS, THEY MAY HAVE BEEN SOLD TO A FEW DIFFERENT BUYERS. FOR EXAMPLE, CERTAIN BYRON MOLDS ARE NOW MADE BY 3 DIFFERENT MANUFACTURERS. CHECK THE MOLD MANUFACTURER COLUMN FOR EACH MOLD YOU WISH TO ORDER ON THE PAGE. YOU CAN SEE HOW WE COMPUTE THE APPROXIMATE SHIPPING COSTS AT THE BOTTOM OF THIS PAGE. Mold Listings Lacking Pictures If a picture is not included with the description of a mold, then we don't have a picture of the finished piece. The reason the picture is not there, it is because the mold manufacturer probably doesn't have one. Note that we will not email pictures to individuals nor try to find a mold that matches a picture you email us. Mold Listings Lacking Sizes The sizes of the finished pieces are sometimes listed in the descriptions. But the description and size is dependent on the information the mold manufacturers gave us. If the size is not given and you need to know, don't ask us, but rather, contact the manufacturer. What if a Mold is Not Listed? If you are looking for a mold attachment that is not listed separately for sale, you will have to order that part directly from the mold manufacturer. If you tried using the Mold Search and did not find what you are looking for, make sure you entered only ONE word that would be in the description. If you were looking for a mold number, make sure you enter ONLY the number without any prefixes or suffixes or name of the mold company. Do not enter S-1300 or DM2300A. Enter only 1300 or 2300. In other words, make sure you have followed the directions. If you are looking for a certain catalog or book not listed on our Books/Catalogs page, we don't have it. No need to call or email us asking where you might get one, we don't know. If you are looking for a mold made by a certain company that is not named in the list under Mold Search, we do not sell it and don't know where you can get it. Please don't ask us. If you are looking for a specific mold from a company we do represent, if it is not listed when you click on the link under Mold Search, consider that all of the molds we sell are listed by mold company in alpha-numeric order. If you are looking for a mold number and it is skipped on our web site, that mold is not available from the manufacturer and we do not know where you might find it. Don't ask us where to get it. We won't know. If you think we are holding back some molds and not listing them, ask yourself a question, "Why would we hold anything back?" That would be stupid. Ceramic Shows WE DO NOT ATTEND THE CERAMIC SHOWS. With the massive loss of manufacturers attending ceramic shows, you have to know which of our mold manufacturers go to the shows. The following manufacturers never attend ceramic shows: NBE Molds and Riverview Molds which also makes Ross Molds. Shiloh Molds and HK Enterprises usually attend the shows. To eliminate shipping charges and get an extra 5% discount, select your molds from our site and in the Additional Information section on the check-out page, indicate what show you want to pick up at and finish checking out. We will charge your card when we receive your order and notify the manufacturer. As long as that manufacturer is going to your show, you will receive the 5% extra discount and you will not pay shipping charges. However, if you fail to pick up your molds at that show, you will forfeit the extra discount and the manufacturer will ship the molds to you and charge you for shipping. MOLD SHIPPING COST ESTIMATE The following chart shows how we compute your approximate shipping costs. Consider that most mold companies are out of business and they have been bought out by several manufacturers. The only mold company that we carry that still makes new molds is Mayco Molds. Clay Magic still makes new molds but you have to go to their website to see them. Add up the total cost of the molds you selected for EACH SPECIFIC MANUFACTURER (not mold company) separately. The mold manufacturer is in a separate column next to the mold company in the mold listing. Then use the table below to get the approximate shipping cost from that particular manufacturer. Add up the Estimated Shipping from each manufacturer of the molds selected to get the total Estimated Shipping Cost that we will charge your card when we process your order. If you have a mold that costs $20 made by Shiloh Molds and another mold that costs $15 from NBE Molds, the approximate cost we calculate for shipping would be $18 + $12 = $30 because each manufacturer is shipping their own molds to you. If your order is going to Alaska or Hawaii, double that amount. Regardles of how much you initially pay for the Estimated Shipping & Handling, the final amount you pay will be the Actual & Handling costs. When all of the molds have been shipped, your total will be adjusted either up or down or not at all from that Estimated Cost we originally charge your card. For shipments to the Eastern or Western Seaboard, you can expect the Actual Shipping Cost to be 10% more because of the way UPS charges for where it goes. Note that the ESTIMATED shipping costs are based on molds that are not too big and do not weight a lot. For a set of large molds weighing 30 lbs or more, expect the estimated and actual shipping costs to be more because these molds have to be shipped one by one in their own boxes due to size and weight constraints. A large order of such molds will have to be shipped by motor freight which has a high cost but will be less than if shipped any other way. Order Size from Specific Manufacturer Estimated Shipping Depending on Manufacturer   HK Enterprises NBE Molds Riverview Molds Shiloh Molds $1 - $26 $22 $14 $36 $22 $27 - $40 90% 90% 120% 90% $41 - $60 80% 80% 100% 80% $61 - $149 70% 70% 90% 70% $150 - $299 60% 60% 80% 60% $300 & Up 50% 50% 70% 50% Top of List For more information on how we make ceramic items, see Overview of Ceramic Methods from Start to Finish © 2010-2023 Indiana Ceramic Supply, Inc. This page last updated 10/11/2023